Plate Rolling
- Over 40 plate rolling machines
- Up to 4600mm wide plates rolled
- Thicknesses from 1.5mm to 100mm thick rolled
- Fully welded cylinders to EN / ASME standards
- Weld prepping facility
- No extra material required on most jobs
- One off, batches or thousands
- Non-ferrous area
- ISO 9001-2008, audited by BSI
Call now for a price on your plate bending
| Midlands |
|
01902 880250 |
|
platebending@barnshaws.com | |
| Manchester |
|
0161 320 9696 |
|
manchester@barnshaws.com | |
| Scotland |
|
01698 421010 |
|
hamilton@barnshaws.com |
Quick callback form
24 hour quick turn around
Rolled and tack welded cylinders from free issue material. The standard service for plate rolling is 4-5 working days.
Cylinders can be fully submerged arc-welded to ASME / EN codes and re-rolled.
Column and boom manipulators enable us to produce welded cylinders from 4,000mm to 350mm diameter. Circumferential seams can be welded to produce cylinders up to 15 metres long.
NDT & PWHT services available.
High-speed plate rolling machines
Barnshaws' modern asymmetric plate rolling machines are perfect for forming plate economically. There is no set up cost so small batches or even single items are economically formed.
No extra material required for metal forming
Most plate needs no extra material, and cylinders can be formed from dead length material.
Non-Ferrous plate rolling specialists
Provided it is protected upon arrival, Barnshaws will guarantee your section or plate will be free from contamination on our site.
Specialist tooling and handling equipment is used.
Quality and standards used for plate rolling
Plate rolling for structural applications meets N.S.S.S tolerances. Section Bending for petrochemical applications meet ASME standards.
